manualshive.com logo in svg

EUROCOM NEPTUNE 4, User Manual

The EUROCOM NEPTUNE 4 is a powerful gaming laptop that promises top-notch performance. To get the most out of your device, be sure to download the User Manual for free at manualshive.com. This comprehensive manual will guide you through all the features and settings of your new laptop.

Share
Download
background image

BIOS Utilities

5 - 14 Security Menu

5

TPM Configuration (Security Menu)

This sub-menu will allow you to enable/disable Trusted Platform Module (TPM)
support, and to configure the TPM State. Select 

TPM Configuration

 and press En-

ter to access the sub-menu. Press Enter to access the 

Security Device Support

 menu

and select 

Enable

 to display the full TPM configuration menu (see 

“Trusted Plat-

form Module” on page 7 - 42

 for details).

Figure 5 - 5

TPM Support

Summary of Contents for NEPTUNE 4



























































































































































































































































































































































Reviews:

No comments

Related manuals for NEPTUNE 4

Brands by name

Popular brands

Load more brands