19
4.8 Automatic functionality
1.
Feed handle positioning
a.
When the feed handles are folded flat against the machine (in a 90 degree angle to
the workpiece), the machine is
in manual standby position
.
In manual standby position it is possible to operate the machine for all suitable tasks
(drilling with annular cutters & twist drills, countersinking, reaming and tapping) by
applying manual feed pressure.
b.
When the feed handles are folded out (in a 45 degree angle to the workpiece), the
machine is in
automatic standby position
In automatic standby position it is possible to start the automatic feed by simply
pressing the ON switch. This is possible with the motor in every height position.
Manual standby position
Automatic standby position
[image 2-7]
WARNING
: Using the automatic feed function is only possible when drilling with annular
cutters up to Ø 55 mm. For Ø 30 – 55 mm the use of TCT annular cutters is advised to ensure
the fastest and most efficient (automatic) drilling performance.
2.
Automatic drilling machines ECO.55-A and ECO.55-TA are equipped with a penetration
recognition. When drilling with annular cutters in automatic mode, the magnetic drilling
machine recognizes when the hole is finished. The machine will automatically return to a
specified height position and shut off the motor by itself.
3.
When there is not sufficient magnetic force, it is not possible to use the automatic drilling
functionality. The magnet indicator will be lit red as warning.
Summary of Contents for ECO.55-A
