Euro Video EVD-16/400A1DH Series User Manual Download

Page: 93 / 196

User Manual of EVD-16/400A1DH Series DVR

6.2 Auxiliary Functions of Playback

6.2.1 Playing Back Frame by Frame

Purpose:

Play video files frame by frame, in order to check image details of the video when abnormal events happen.

Steps:

•

Using a Mouse:

Go to Playback interface and click button

and

until the speed changes to

Single

frame. One click on

the playback screen represents playback or adverse playback of one frame. It is also feasible to use button

in toolbar.

•

Using the Front Panel:

Rotate the inner control on Jog Shuttle counterclockwise or press the

button to set the speed to

Single

frame. One click on button

represents playback or adverse playback of one frame.

6.2.2 Smart Search

Purpose:

In order to locate motion detection event easily and accurately in the playback progress bar, you are allowed to

analyze a certain area (scene) dynamically, and to get all of the related motion detection events that occurred in

this area.

Steps:

Go to Playback interface and play the video.

Figure 6.30 Interface of Playback by Time

Right-click mouse and select Smart Search to go to analysis area selection interface.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands