Euro Video EVD-16/400A1DH Series User Manual Download Page 143

Page: 143 / 196

User Manual of EVD-16/400A1DH Series DVR

142

Figure 9.11 SNMP Settings Interface

Check the

SNMP

checkbox to enable this feature.

Configure the SNMP settings.

Figure 9.12 Configure SNMP Settings

Click the

Apply

button to save and exit the interface.

Note:

Before setting the SNMP, please download SNMP software and manage to receive the device information

via SNMP port. By setting the Trap Address, the DVR is allowed to send the alarm event and exception message

to the surveillance center.

9.2.6 Configuring Remote Alarm Host

Purpose:

With a remote alarm host configured, the DVR will send the alarm event or exception message to the host when an

alarm is triggered. The remote alarm host must have the Network Video Surveillance software installed.

Summary of Contents for EVD-16/400A1DH Series





































































































































































































Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands

Euro Video EVD-16/400A1DH Series, User Manual

Search results

Summary of Contents for EVD-16/400A1DH Series

Reviews:

Related manuals for EVD-16/400A1DH Series

Brands by name

Popular brands