Euro-Pro Shark 7133, Instruction Manual, Page: 38 / 107

30
Bringing up the lower thread
GB
Hold the upper thread with the left
hand. Turn the handwheel towards
you with your right hand until the
needle goes down and comes up
again to its highest position. (1)
- Lightly draw the needle thread
forming a loop with the bobbin
thread. The upper thread should
have caught the lower thread in a
loop.
- Pull the needle thread toward you
and the lower thread will come up
from the bobbin in a large loop. (2)
Pull about 15 cm. (6") of both thread
away from you under the presser
foot.
2
1