Euro-Pro Shark 7133, Instruction Manual, Page: 32 / 107

A
Caution:
Before threading, turn power switch
to “0”.
Raise the needle bar to its highest
position. Follow exactly the numbered
threading sequence illustrated.
If you skip a step or fail to properly
engage the thread in any of the thread
guieds, the machine will not sew
properly. (Illustrations 1-5)
Continue to draw the thread down
and into the needle bar thread guide.
Insert the thread through the eye of
the needle from the front to the back.
Leave about 10 cm (4”) of thread loose
behind the needle. (Illustration 6)
a. Spool pin felt