51
3.
Disable the automatic IP Address allocation by unchecking the "From DHCP" check-box in the
IP Address panel
4.
Fill-in the IP and Subnet Mask fields with the appropriate value
5.
Apply the changes by clicking on the Apply button
6.
Reboot the device
HTTPS Protocol
Picolo.net HD1 products implement the following TLS protocols:
□
TLS 1.0 as described by RFC 2246
□
TLS 1.1 as described by RFC 4346
□
TLS 1.2 as described by RFC 5246
The TLS protocol uses a hybrid encryption scheme, using a public-key algorithm to exchange
securely between the server and the client a session key. That key is then used by a symmetric
key algorithm to encrypt and decrypt the subsequent messages.
The combination of HTTP and TLS is more widely known as HTTPS.
System Integration Specifications
System Integration
Characteristics
Description
Alarm inputs
1 non-isolated polarity insensitive input for closing
contacts or electronic sensor with CMOS digital outputs
Alarm inputs connector
GPIO: 4-pin 3.81 mm pluggable terminal block socket &
plug with screw, rising cage clamp, cable termination.
Relay outputs
1 potential-free normally open contacts
Relay outputs connector
GPIO: 4-pin 3.81 mm pluggable terminal block socket &
plug with screw, rising cage clamp, cable termination
COM
2 serial COM ports:
□
1 with RS-232 full-duplex interface
□
1 with a combined RS-422 full duplex/ RS-485 half
duplex interface
COM connector
COM: 8-pin 3.81 mm pluggable terminal block socket &
plug with screw, rising cage clamp, cable termination
PTZ COM Protocols
Pelco-D, Sony VISCA
Watchdog
Yes
Picolo.net
Getting Started
