1. If the input water Iron content is more than 0.3 mg/litre, use of an Iron Remover** is recommended as
a Pre-treatment.
2. If the input water turbidity is more than 5 NTU, or comprises of colloidal particles, use of a special
filter** is required as a pre-filter.
3. If the input water TDS is more than 1,000 ppm (mg/L) or input water hardness is more than 300 ppm
(mg/L), use of a Membrane life enhancer** is recommended.
4. Do not install the water purifier if the TDS is more than that prescribed in the technical specifications.
**Available at an extra cost.
INPUT WATER QUALITY USAGE LIMITATIONS
S.N
CONSUMABLE CARTRIDGES
AVERAGE SERVICE LIFE
1
HD - Filter
TM
DIY
6,000
#
litres
6,000
#
litres
6,000
#
litres
6,000
#
litres
2
Chemi-Block DIY
3
HD RO Membrane Filter DIY
4
UV Lamp (11 Watts)
8,000** burning hours
5
Active Copper Maxx
TM
Cartridge
6
Ayur Cartridge
600 litres
@#
7
Biotron
TM
6,000
#
litres
Silver Shield
6,000
#
litres
8
#
As per standard test conditions.
**As per UV manufacturer’s specifications.
@
The taste experience might vary depending upon individual’s palate.
FOR Dr.Aquaguard
TM
EDGE with AYURFRESH
TM
