SD20-G Series
89
The display content is:
The quoting mode is Po300.A=1.
■ Five parameters display
□□□□□
The first digit means current page, the other digits mens current value.
E D C B A
For example: set value of HOME, Po136=131072, the actual display content is as below:
SET
SET
Input source of control mode and control command
Speed
Position
Torque
Setting range
Setting unit
Mfr
’
s value
When Enabled
Po001
Two parameters
N/A
1 0
After restart
Name
Parameter scope
Parameter
Indicates setting range
for the parameter.
The unit of parameter
Indicates parameter
value before shipment
(Factory setting).
Indicates if the power has to
be turned OFF and ON again
to validate setting changes.
Note: parameter scope means control mode for which the parameter is available
Speed means speed mode; Position means position mode; Torque means torque mode.
Summary of Contents for SD20-G Series
