06
07
Using Your RoboVac
Important tips before use
a
b
c
d
e
a
Remove power cords and small objects from the floor that may entangle RoboVac.
b
Remove rugs that are thicker than 0.4 in/10 mm as they may cause RoboVac to
malfunction. Fold tasseled edges of area rugs underneath to prevent tangling RoboVac.
Do not use RoboVac on middle or long-pile carpeting.
c
Avoid cleaning spaces lower than 3.9 in/98 mm to prevent RoboVac from getting stuck.
d
Prevent liquid from entering RoboVac as it may cause damage.
e
Anti-drop sensors prevent RoboVac from tumbling down stairs and steep drops. They
may work less effectively when they are dirty, or on reflective/dark-colored floors. It is
recommended to place a physical barrier to block off problem areas where the device
may fall.
Dust Collector
Filter door
Filter door release button
HEPA-style filter
Foam filter
Filter cover
Charging Base
Status light
Power socket
Charging contact pins
Remote Control
5
8
1
2
3
4
6
7
Start/Stop Auto cleaning
Start /Stop cleaning
Adjust direction manually
Start Single Room cleaning
Return RoboVac to the Charging Base
Start Max cleaning
Start Spot cleaning
Start Edge cleaning
Install 2 AAA batteries before using the remote control for the first
time. Make sure the positive and negative ends are facing the correct
polarity direction as marked in the battery compartment.
T
