EUCHNER CES-I-AS2A-M-C04, Operating Instructions Manual, Page: 13 / 24

13
2120545-05-08/18 (translation of the original operating instructions)
Operating Instructions
Non-Contact Safety Switch CES-I-AS2A-M-C04
EN
11. Technical data
NOTICE
If a data sheet is included with the product, the information on the data sheet applies.
11.1. Technical data of safety switch CES-I-AS2A-M-C04
Parameter Value Unit
min. typ. max.
Housing material Plastic PBT
Rubber-support material NBR 80 ±5 Shore
Fixing screw tightening torque - - 0.8 Nm
Dimensions 42 x 25 x 18 mm
Weight (without connection cable) 0.04 kg
Ambient temperature at U
B
= DC 30 V -25 - +65
°C
Storage temperature -25 - +70
Degree of protection IP67
Safety class III
Degree of contamination 3
Installation position Any
Installation method Non-flush
Connection M8 plug connector, 3-pin
For the approval according to UL the following applies Operation with UL-class 2 power supply only
Rated insulation voltage U
i
- - 300 V
Rated impulse withstand voltage U
imp
- - 1.5 kV
Resilience to vibration In acc. with EN IEC 60947-5-2
Switching frequency - - 1 Hz
Ready delay - 0.5 - s
Risk time - - 260 ms
Switch-on time 300 ms
AS-Interface data EA code: 0 ID code: B
AS-i operating voltage 19 - 31.6 DC V
Total current consumption - - 50 mA
Valid AS-Interface addresses 1 - 31
AS-Interface inputs Acc. to AS-Interface Safety at Work
Door monitoring contact D0 - D3
Reliability values according to EN ISO 13849-1
Category 4
Performance Level PL e
PFH
D
4.5 x 10
-9
/ h
Mission time 20 years