manualshive.com logo in svg

EUCHIPS EUP12D-1H12V-0, User Manual, Page: 1 / 4

Share
Download
EUCHIPS EUP12D-1H12V-0 User Manual Download Page 1

                                                                                                                   

SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD

 

EUP12D-1H12V-0 User Manual V01.1 

                                                        1                                                                     

www.euchips.com 

 

 

EUP12D-1H12V-0 

DALI Constant Voltage Dimming Driver 

 

Summary 

EUP12D-1H12V-0  is  a  constant  voltage  mode  output  LED  driver  and  complies  with  DALI  standard  protocol  IEC 

62386. This driver can be connected to DALI main controller or Touch DIM to achieve a smooth dimming effect. 

Product Features 

 

Single channel constant voltage output,1A Max 

 

Meet DALI protocol IEC 62386 

 

Support Touch DIM function 

 

Dimming effect smooth, no flicker 

 

Over load protection; Over voltage protection 

 

IP20, suitable for MR16 and other indoor LED lighting   

Summary of Contents for EUP12D-1H12V-0

Page 1: ...er and complies with DALI standard protocol IEC 62386 This driver can be connected to DALI main controller or Touch DIM to achieve a smooth dimming effect Product Features Single channel constant voltage output 1A Max Meet DALI protocol IEC 62386 Support Touch DIM function Dimming effect smooth no flicker Over load protection Over voltage protection IP20 suitable for MR16 and other indoor LED ligh...

Page 2: ...VAC full load PF 0 5 230VAC full load Current 0 15A 230VAC Inrush current Cold start 12A 230VAC Protection Short circuit Close output recovers automatically after fault removed Over load Close output recovers automatically after fault removed Over temperature Shut down the output recovers automatically when temp back to normal Function Dimming mode DALI Touch DIM Others Dimension 78 36 29 mm L W H...

Page 3: ...echnical personnel to match and verify DALI Diagram Touch DIM diagram Remark Only use open push button without indicator light Maximum cable length between each Unit 20 meters 1 Short press the Touch DIM switch 0 5s to control the lamp on or off 2 Long press the Touch DIM switch 0 5s to dim the brightness of light The dimming direction will change every time after pressing switch 3 Double click th...

Page 4: ...M function 3 This product is non waterproof Please avoid the sun and rain When installed outdoors please ensure it is mounted in a water proof enclosure 4 Good heat dissipation will prolong the working life of the controller Please ensure good ventilation 5 Please check if the output voltage and current of any LED power supplies used comply with the requirement of the product 6 Please ensure that ...

Reviews:

No comments