EUP10D-1HMC-0-120
(
Product No.
:
3.04.001575
)
DALI Constant Current Dimming Driver
Summary
Product Feature
Touch DIM(Push DIM)
200VAC-240VAC
50/60Hz
82%@230VAC, Full load
0.95@230VAC, Full load
<0.5W
cold start,10A(twidth=10us measured at 50% Ipeak@230VACC
0.06Amax@230VAC, Full load
110*30*22.5mm(L*W*H)
60g
IP20
-20
℃
~50
℃
-40
℃
~85
℃
, 20-90%RH
75
℃
L-N:500V
I/P-O/P: 1500VAC
PC
50,000h@tc:75
℃
1%-100%
50VDC
±5%
<3%
DALI
/
>100,000 times
1
120mA/9-45VDC/5.4W
220mA/9-45VDC/9.9W
150mA/9-45VDC/6.75W
250mA/9-40VDC/10W
170mA/9-45VDC/9.9W
270mA/9-37VDC/9.99W
200mA/9-45VDC/9W
300mA/9-33VDC/9.9W
<10%@230VAC, Full load
EUP10D-1HMC-0-120
Surge
Withstand Voltage
IEC 62386-101: 2014, IEC 62386-102: 2014
;
IEC 62386-207: 2009, DALI 1.0
DALI Standrad
tc
Lifetime
Material
Dimming Range
Dimension
515*235*140mm(L*W*H), 9.5Kg/Carton/100PCS
Packing Size
G.W
IP Rating
Working Temp.
Storage Temp.; Humidity
Dimming Mode
Switch Cycle
5 years
Warranty Condition
No Load Output Voltage
Turn On Delay Time
<1s, at 230Vac
Efficiency
Standby Power
Current
Inrush Current
THD
Current/voltage/power
Ripple Current
Channel
Current Tolerance
Voltage
Frequency
Power Factor
No Load
Short Circuit
Over Load
The LED Driver will not be damaged.
Hiccup mode, recovers automatically after fault condition is removed
No Output, recovers automatically after fault condition is removed
Safety
Others
Function
Model
Output
Input
Protection
Technical Parameters
1/2
User’s manual: 2019-8
www.euchips.com
Current Selection Table
Remark: Function default setting is: 120mA (@switch are all OFF state)
120mA
150mA
170mA
9-45V
9-45V
220mA
9-45V
9-45V
ON OFF
220mA
9-45V
250mA
9-40V
270mA
9-37V
300mA
9-33V
EUP10D-1HMC-0-120 is a 10W AC/DC constant current mode output LED driver featuring the multiple levels
selectable by DIP switch and complies with DALI standard protocol IEC 62386. EUP10D-1HMC-0-120 can be
connected to DALI main controller or Touch DIM(Push DIM) to achieve a smooth dimming effect.
·Single channel output, output current level selectable by DIP S.W.
·Meet DALI Protocol IEC 62386-207
·Support Touch DIM (Push DIM)function
·High efficiency up to 82%
·Built-in active PFC function
·Dimming effect smooth, no flicker
·Protections: Short circuit, over load, no load
·Suitable for indoor LED lighting application, such as down light, spot light, and so on
