Etymotic Research ER 3C User Manual Download Page 1

ER-3A is a registered trademark of Etymotic Research, Inc.  

Tubephone and ER-3C are trademarks of Etymotic Research, Inc.

Single-Use-Eartips is a trademark of Grason Associaties, Inc. 

Telephonics is a registrated trademark of Telephonics Corporation
Patent Pending.
©2016 Etymotic Research, Inc.    

ER003442-C

WARRANTY

Etymotic Research, Inc. warrants each insert earphone it manufactures 

to be free of defects in material and workmanship for a period of one 

year from the date of sale to the original purchaser. Etymotic Research’s 

obligation under this warranty is fulfilled, at ERI’s option, by replacing 

the product in kind without charge to the original purchaser, repairing 

the part, or crediting the original purchaser with the purchase price of 

the returned defective part. For a part to be covered by the warranty 

it must be returned to Etymotic Research, postage prepaid, within 

the warranty period, and the part must not show evidence of misuse, 

neglect, incorrect wiring by others, or improper installation.

DISPOSAL

Within the European Union it is illegal to dispose of electrical and 

electronic waste as unsorted municipal waste. Electrical and electronic 

waste may contain hazardous substances and therefore have to be 

disposed of separately. Such products will be marked with the crossed-

out wheelie-bin image shown below. User cooperation is important 

in order to ensure a high level of reuse and recycling of electrical 

and electronic waste. Failure to recycle such waste products in an 

appropriate way may endanger the environment and consequently the 

health of human beings. Outside the European Union, local regulations 

should be followed when disposing of the product after its useful life.

Manufacturer

Etymotic Research, Inc.
61 Martin Lane
Elk Grove Village, IL 60007 USA 
Phone: 847-228-0006
Toll free (U.S.): 888-389-6684
Facsimile: 847-228-6836
Technical support: 
customer-service@etymotic.com
www.etymotic.com

User Guide

TM

INSERT EARPHONES

EU Authorized Representative

Medical Device Safety Service (MDSS) GmbH
Schiffgraben 41
D-30175 Hannover
Germany

Summary of Contents for ER 3C













Reviews: