EtungTech
LED-328 User Manual
21
Figure 2-14: Update complete
2.5
Remote Configurations
SMS or AT commands can be used on LED-328 to remotely modify the IP
address and port of the data center. Details are described below one by one:
1.
Use SMS to remotely modify IP address and port within LED-328.
1)
In order to use SMS to modify IP and port within LED-328, LED-328
must be offline, because LED-328 can detect whether SMSs for
configurations are received or not only when it is dialing, and then
updates it’s IP and port accordingly.
2)
Format of SMS configuration is:
1234;IP;port
For example: 1234;
da.wuxianled.com;8888
";" is semi-colon in English. 1234 is the initial password. In order to
change the password, LED-328 must be connected to PC via serial
port, enter LED-328 configuration menu, and set "Password to
configure SMS" (default is 1234). Please pay attention, this password
allows only digits or characters in English or the combination of them.