eTung ER-701T, User Manual

Page: 66 / 67

ER-701T User Manual
66
Appendix 7: AT Commands on the
Router’s Ethernet Interface
eTung’s wireless routers support AT commands directly coming from Ethernet
interface, to query status, modify parameters, send/receive SMS, etc. The AT
commands that a router supports can be different based on different models and
different firmware versions. Below are the AT commands on the Ethernet interface
that ER-701T V1.0.0 or higher versions support.
Attention: the AT commands MUST be in uppercase, and MUST end with CR(0x0d),
as shown in “\r” below.
For the following commands, please refer the descriptions of AT commands via SMS
in “2.5 Remote Configurations”
1. AT+WN=apn,user,passwd,net_mode\r
2. AT+DC=addr,port,user,mode\r
3. AT+PWD=passwd\r
4. AT+VIRHUB=0/1\r
5. AT+RESTORE\r
6. AT+REBOOT\r
7. AT+STATUS? \r
8. AT+WN? \r
9. AT+DC? \r
10. AT+INFO? \r
11. AT+VIRHUB? \r
12. AT+UPDATE=url\r
13. AT+UPDATEALL=url\r
Following are the AT commands used to send SMS, for details please refer
“Appendix 6: Send/Receive SMS with the Router and SMS Format”.
14. AT+SMS=<target number>,<encoding format>,<data length>,<data>\r
15. AT+SMSA=<target number>,<data length>,<data>\r
Following are the AT commands that can be used only on Ethernet interface, and
currently cannot be used via SMS.
16. AT+UPTIME\r
Get the system’s running time, and the return value is in seconds.
17. AT+DISCCOUNT=YYYYMMDD\r