eTung ER-701T, User Manual

Page: 21 / 67

ER-701T User Manual
21
2.2 Configuration Parameters
Each configuration menu has multiple parameters, and some of them
have sub-menus. Details are described below.
Configuration Menu Item Description
Current status
Show device information, connection and
data transfer status.
Network
Settings
Network Select
Configure to use wireless (2G/3G/4G),
cable network (WAN) or WIFI, set ICMP
host, and whether to allow external access.
Wireless Basic
Set user information about dialing into
internet and SMS function, normally with
default value. “Network mode” area is
“Auto Switch” be default. If SIM card does
not support 4G or there is no 4G signal,
PLC-505 can automatically switch to
3G/2G network.
Wireless Advanced Check network debugging information
WAN Configure WAN interface
WIFI client
Configure WIFI parameters. Once WIFI is
enabled, WAN will be disabled.
LAN Set inner IP and DHCP
WIFI Hotspot
Configure WIFI hotspot parameters. WIFI
hotspot and WIFI client cannot be used at
the same time, to enable WIFI hotspot
function, please disable WIFI client if it is
enabled: set network to 4G or WAN other
than WIFI in network settings.
Forwarding
rules
NAT
Whether the device connected with router
can access internet via NAT.
Port forwarding
Use pre-defined port to forward data from
internet to some inner IP's dedicated port.
DMZ host
Forward data from internet directly to
some inner IP.
Routing Forward data to a pre-defined inner IP
DDNS
Domain resolving function, configure the
router to have a static domain to be easily
accessed.
VPN
PPTP&L2TP
Login with username and password to
connect VPN
GRE settings
Set routing data encapsulation mode,
normally with default value.
DTU Simple settings Set master data center address and serial