4. Assembling Your E-Scooter
05
Disassemble
Assemble
1. Unfold the pole and fasten the
folding lock.
2. Connect the two cables, which is
the communication wire between
display pcb and controller pcb.
Align the notch and connect.
3. Align the T-bar of the scooter
then insert it into the pole, use
the screw provided with the
scooter to install and fix it.
1. Loosen the screws that secure
the T-bar of the scooter.
2. Pull out the head of the scooter,
unplug the communication line
between the display and the
controller, the dismantling part of
the head of the scooter is complete.