ETIC RAS-E, User Manual, Page: 75 / 132

ADVANCED SET-UP
Machine Access Box RAS
DOC_DEV_RAS_User guide_A
Page 75
2.3 Wi-Fi access point set-up
Remark : The Wi-Fi module can be set-up either like a client or like an access point.
To set-up the Wi-Fi access point,

Select the Set-up > LAN interface > Wi-Fi acces point menu

Select the Wi-Fi access point checkbox
« Network name (SSID) » parameter :
Enter the
name assigned to the Wi-Fi network to which the router RAS has to connect.
Attention : The SSID is case sensitive.
« Preshared key » parameter :
Enter the WPA preshared key (at least 8 characters).
« Country code» parameter :
The RF channels allocated to the Wi-Fi service are not the same in all the countries.
It is why, the country code has to be entered carefully.
Click the help menu to display the list of the country codes.
« Wi-Fi Mode» parameter :
Select one of the possible Wi-Fi modes :
Mode 802.11a : 5 GHz OFDM
Mode 802.11.b : 2,4 GHz DSSS
Mode 802.11.g : 2,4 GHz OFDM
Remark : the selected Wi-Fi mode must be entered in each Wi-Fi client (tablet …).
« RF channel» :
Select a traffic channel in the list.
Remark :
It is preferable to select an unused channel at the location where the router RAS is installed.
Use the Wi-Fi scanner to display the channels used by the Wi-Fi networks active at the same location.