ETIC RAS-E, User Manual, Page: 52 / 132

SETTING-UP THE ROUTER WITH THE WIZARD
Page 52
DOC_DEV_RAS_User guide_A
Machine Access Box RAS
Use case 2 set-up
All the devices of machine belong to the factory network. The router RAS is also connected to the factory
network through its LAN interface.
Attention :
In that situation, a remote user can access remotely to all the devices connected to the network and not only
to the machine devices like in the Use case 1. it is why it is important to define strictly the authorised
devices and the access rights.
Use
case Router RAS
models Internet
access interface to the
Internet
2 all Factory
network Ethernet LAN
STEP 1 : SELECT THE USE CASE
 Select the use case 2.
STEP 2 : M2Me CONNECTION
The « Ethernet LAN » page is displayed.
« IP address», « network mask », Default gateway», “Primary DNS server”, “Primary DNS server” parameters :
Enter the IP address assigned to the router over the LAN interface.
That IP address will have to be entered to display the administration server of the router.
Enter the DNS servers IP addresses and the defaukt gateway IP address (gateway to the Internet).
«Are machine IP network (LAN) and remote maintenance PC IP network overlapping? question :
If the answer is Yes, enter the translated IP domain assigned to the machine.
 Click « Next»
The proxy server page is displayed.
« Direct access to the Internet (no proxy) » check box :
Leave that checkbox not selected if no Proxy server exists on the WAN network.
Otherwise, select that checkbox and enter
the type of the proxy server (HTTP, SOCKS5)
the proxy IP address and port number
the type of required authentication (None, basic, NTLM) if the proxy is http

Click « Next «