manualshive.com logo in svg

ETIC IPL-I1128, User Manual, Page: 50 / 56

Share
Download
ETIC IPL-I1128 User Manual Download Page 50

 
MAINTENANCE 

Page 50 

User manual ref. 9017109-01 

IPL-M156 / IPL-I1128 / IPL-L134 router

 

 

 

2  Saving the parameters file 

Once a product has been configured, the parameters file can be stored 
and restored when necessary. 

To save the parameters file, 

Select the “System” menu and then “Save restore”, 

Click the ”Save” button 

Select the location to store the file and give a name to the file. 

The file suffix is “.bin”. 

To restore a parameters file 

Select the “System” menu and then “Save restore”, 

Click the “browse” button and select the parameters file, 

Click the “Load” button and confirm to restart the product. 

 
Attention :

 A parameters file can only be restored towards a product 

having the same firmware version. 
 

3  Updating the firmware 

 

Step 1 : Before starting, you need, 

 A PC with a Web browser. 

An Ethernet cable or a switch 

The FTP server software which can be downloaded from the « firmware 
page » of the ETIC « download area » web server. 

 

Step 2 : Download the release of the firmware from our download 
area to your PC 
 
Step 3 : Prepare the PC  

Check the Ip address of the PC is compatible with the one of the router. 
 

Connect the router to the PC. 
 
Launch the TFTP server (tftp32.exe) software and select the new release 
(L026xxx/img) by using the "Browser" button. 

Summary of Contents for IPL-I1128

























































Reviews:

No comments