manualshive.com logo in svg

ETIC IPL-I1128, User Manual, Page: 43 / 56

Share
Download
ETIC IPL-I1128 User Manual Download Page 43

 

CONFIGURATION 

 

IPL-M156 / IPL-I1128 / IPL-L134 router 

User manual ref. 9017109-01

 

Page 43

 

 
 
 
 

TCP inactivity Timeout : 

Set up the time the gateway will wait before disconnecting the TCP link if 
no characters are detected. 
 

TCP port number

 :

 

Set up the port number the gateway has to use. 
 

12.3 Multicast gateway 

12.3.1 Overview  

The multicast gateway permits to connect together a group of serial 
devices, and also Ethernet IP devices, through an IP network.  
 

 

The serial multicast gateway can be used, for instance, when a serial 
master device has to send requests to many slave serial devices (also 
called server) located on the IP network. 
 
Serial data is transmitted by each serial device to all other serial devices  
through the IP network. 

 

But at the opposite of the RAW UDP technology described previously, 
that Multicast gateway does not send an IP frame to each destination IP 
gateway. 
 
Serial data is encapsulated in a unique IP frame 

transmitted to a 

multicast address

 received by all the gateways or IP devices.

 

 
 

Summary of Contents for IPL-I1128

























































Reviews:

No comments