manualshive.com logo in svg

ETIC IPL-I1128, User Manual, Page: 29 / 56

Share
Download
ETIC IPL-I1128 User Manual Download Page 29

 

CONFIGURATION 

 

IPL-M156 / IPL-I1128 / IPL-L134 router 

User manual ref. 9017109-01

 

Page 29

 

 

Dedicated line connection / advanced parameters

 

Click the “advanced conf.”  button to configure advanced functions :

 

Type of 

connectio

n 

 

OUT IN 

Parameter 

X X 

“Firewall filter”  parameter : 

Select the firewall filter  assigned to the connection

 

X X 

“NAT”  parameter : 

Select “yes to enable the NAT function. 
In that case, the PPP IP address of the router is assigned as 
the source address to all IP frames transmitted  by a device 
towards the PSTN  or ISDN. 
If no PPP IP address has been entered, it is replaced by the 
IP address of the router over the Ethernet interface.

 

X X 

“Router PPP IP address ”  and “Remote router PPP IP 
address” parameters : 

Enter the IP address assigned to the PPP interface. 
If no IP address is entered, the address of the Ethernet 
interface is assigned automatically.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for IPL-I1128

























































Reviews:

No comments