ETIC IPL-I1128, User Manual, Page: 22 / 56

CONFIGURATION
Page 22
User manual ref. 9017109-01 IPL-M156 / IPL-I1128 / IPL-L134 router
stored IP address (the IP address which is displayed) will be used by the
product.
Wrong Login to the administration server
The access to the administration server can be protected by a login and
password; If the Login & or password entered to access to the
administration server have been rejected, it is possible to recover a
free
access from the LAN only , by setting SW01 ON and SW2 OFF.
Careful : The factory IP address 192.168.0.128 will also automatically be
assigned to the product as long as SW01 will remain ON and SW2 OFF.
5 Saving configuration modifications
•
Once modifications of the parameters of one page have been carried
out, click the « Save » button at the bottom of the screen.
•
After some parameters changes, the IPL must restart.
When the configuration has been completely carried out, click the
«
Reboot » red button in the green bar, if it is displayed.
•
Once the product has restarted, check the red « Reboot » button has
disappeared from the green bar.
•
If you wish, save the configuration file using the “Save restore“ menu.
6 Assigning an IP address to the LAN interface
Click « System » and
then « IP protocol».