ETIC IPL-I1128, User Manual, Page: 21 / 56

CONFIGURATION
IPL-M156 / IPL-I1128 / IPL-L134 router User manual ref. 9017109-01
Page 21
3 Modifying the configuration parameters through the LAN
•
If the IP @ of the IPL is assigned by a BOOTP - DHCP server
Step 1 : Check the DIP switches SW1 is OFF and SW2 OFF to select
DHCP / BOOTP operation.
Step 2 : Launch ETIC FINDER to detect the IPL over the LAN.
Click the product once detected.
The Home page of the administration server is displayed.
Note :
If the home page cannot be displayed, refer to paragraph 4 below.
•
If the IP @ of the IPL is fixed
Launch the html browser and enter the IP address assigned to the router.
Or, launch the ETICFINDER utility.
•
Configuration modifications through the Internet
Modifications can be also carried out through the Internet.
We advise to protect the access to the administration server with a
password.
The modifications have to be carried out cautiously to avoid to loose the
link with the router.
4 Wrong IP address or password
When launching the html browser, the homepage of the html server may
not be displayed; the cause may be the IP address you entered or the
password you used were wrong.
if the IP address you enter is wrong, you can recover the factory IP
address by setting SW01 ON and SW2 OFF.
The factory IP address 192.168.0.128 will be restored as long as the
SW01 micro switch will be left ON. Once, SW01 will be set OFF, the