manualshive.com logo in svg

ETIC IPL-G12, User Manual, Page: 85 / 102

Share
Download
ETIC IPL-G12 User Manual Download Page 85

 

CONFIGURATION 

 

3G-GPRS-EDGE router IPL-G12 

User manual ref. 9017009-02

 

Page 85

 

 

22  Advanced functions 

22.1  Adding a certificate 

Coming from the factory, the IPL-G12 router includes a certificate 
delivered by ETIC TELECOM acting as a certification authority. 
 
That certificate can be used to set a VPN between two routers. 
 
Two IPL-G12 routers can set a VPN with one another using certificates 
only if the certificates have been provided by the same authority. 
 
Additional X509 certificates, provided by ETIC Telecommunications or 
not,  can be downloaded  into the router. 
 
To import a new certificate, the file extension can be PKCS#12 with a 
password or PEM. 
 
Even if more than one certificate have been downloaded into the IPL-G12 
router, one certificate can be used for all the connections. 
 

22.2  Alarms 

22.2.1  SNMP  

The IPL-G12A router is able to send snmp traps when alarms occur. 
 

Activation” parameter 

 : 

If that option is selected, the router will send an SNMP trap if an alarm is 
detected. 
 

“SNMP network management  IP address”

 

parameters :

 

Enter the IP address of the management platform 
 

“SysName” & “SysLocation” parameters :

 

That fields allow to identify the source device.

 

Example :  
Sysname : etic 
Syslocation : France 
 

Summary of Contents for IPL-G12







































































































Reviews:

No comments