manualshive.com logo in svg

ETIC IPL-G12, User Manual, Page: 80 / 102

Share
Download
ETIC IPL-G12 User Manual Download Page 80

 
CONFIGURATION 

Page 80 

User manual ref. 9017009-02 

3G-GPRS-EDGE router IPL-G12

 

 

 

21.1.2  “Modbus client” gateway 

This gateway allows to 
connect a serial modbus 
master to the serial 
interface of the IPL-G12. 

 

 

• 

Select the modbus menu and then “modbus client” menu; enable the 

“modbus client” gateway and set up the parameters as follows : 
 

ASCII / RTU protocol

 : 

Select the right option 
 

Inter-character gap

 :

 

Set up the maximum delay the gateway will have to wait between a 
received character of a modbus answer frame and the following character 
of the same frame.  
 

TCP inactivity Timeout

 : 

Set the time the gateway will wait before disconnecting the TCP link if no 
characters are detected. 
 

TCP port number

 :

 

Set the TCP port number the gateway has to use. 
  

IP address

  :

 

The modbus client gateway allows to transmit modbus requests from the 
serial modbus master device to any modbus slave device, more precisely 
called “ modbus server”, located on the IP network. 

Summary of Contents for IPL-G12







































































































Reviews:

No comments