CONFIGURATION
Page 66
User manual ref. 9017009-02
3G-GPRS-EDGE router IPL-G12
17.2 Configuring the M2Me_Connect connection
Step 1 : Router configuration
•
Select the « Internet » menu and then « Connection ».
« M2Me_Connect » parameter:
Select “Activate”.
•
Click “Properties” to tune the outgoing connection from the router to the
M2Me_Connect” server.
“TCP ports” and “UDP ports” parameters :
Select the ports the router must check to set a connection to the
M2Me_Connect service.
“Proxy” parameters :
Leave the proxy checkbox unselected.
•
Test the connection
Click the “Control” menu, and press the “connect now” button.
Go to the ”Diagnostic” menu, “Network status” menu and then “M2Me”.
When the connection between the router and the M2Me_Connect service is established,
the port number and protocol are displayed.
•
Deselect the ports number needlessly selected
If too many ports have been selected, the connection delay may be long; it is why we
advise to unselect all the ports except the one which has finally been successful.
Step 2 : Configuring the M2Me_Secure software
•
Click « Menu » and then « New site ». The Site configuration window is displayed.
•
Select the « General » tab and enter a site name.
•
Select the « Connection » tab; select the option “That site can be
reached through the Internet and the “M2Me_Connect” option.
Enter the product key of the router; it can be pasted from the “About”
menu of the router.
Attention :
if you paste the product key, delete the last character and enter it again.