ETIC IPL-G12, User Manual, Page: 53 / 102

CONFIGURATION
3G-GPRS-EDGE router IPL-G12 User manual ref. 9017009-02
Page 53
To set a static route,
•
Select the “ Routing ” menu and then “ Static routes ”.
•
click the “ Add a route ” button.
“Destination IP address” & “netmask” parameters :
Enter the destination network IP address and netmask.
“Gateway IP address” parameters :
Enter the Ip address of the gateway through which the IP packets
intended for that network must pass.
14.3 RIP protocol
RIP ( Routing Information Protocol ) is a routing protocol which enables
each router belonging to a network to acquire the routes to any subnet.
The principle is as follows :
Routing table
Each router holds a routing table.
Each entry of the table consists in the destination subnet address and the
adjacent router address leading to that subnet.
Routing table broadcasting :
Each router broadcasts its table .
Routing table update :
Each router updates its own table using the tables received from the other
ones.
To enable RIP,
•
Select the “ Routing ” menu and then “ Static routes ”.
•
Select the ‘
Enable RIP on LAN interface” and the “Enable RIP on WAN
interface” options.