manualshive.com logo in svg

ETIC IPL-G12, User Manual, Page: 42 / 102

Share
Download
ETIC IPL-G12 User Manual Download Page 42

 
CONFIGURATION 

Page 42 

User manual ref. 9017009-02 

3G-GPRS-EDGE router IPL-G12

 

 

 
 

“Remote WAN IP address” parameter :  

Enter the IP network address and netmask assigned to the remote router 
over the Internet (public IP address over Internet).

 

 

“Remote LAN address” & “Remote LAN netmask” parameter : 

Enter the IP network address and netmask assigned to the remote LAN. 
 

• 

Case a preshared key is used 

If the key used by the connection is the general PSK entered in the VPN 
menu,  no additional parameter has to be entered. 
 
If a particular PSK must be used, complete the configuration of the 
connection as explained below.

 

 

“Unique PSK for this node” parameter : 

If that option is not selected, the preshared key entered in the VPN  
configuration screen will be used by the router. 
If that option is selected, enter the specific key. 
 

“My WAN address” & “Remote WAN address” parameters :

 

Enter the WAN IP address of the IPL-G12 router (public IP address over 
Internet) and the WAN IP address of the remote router. 

 

 

• 

Case a certificate is used for authentication 

“My subjectAlt name” & “Remote subjectAlt name” parameter  : 

Paste the field "SubjectAltName" of the active certificate of the router you 
are configuring and the one the remote router.  
 

Attention : For ETIC certificates, this field is  the Email field. 
 

Summary of Contents for IPL-G12







































































































Reviews:

No comments