PREPARING THE SETUP
Page 20
DOC_DEV_XSRACK_User guide_A
1.2
First configuration
Step 1 : Create or modify the PC TCP/IP connection
Assign to the PC an IP address different but consistent with the factory IP address of the XSRACK slot
For the first configuration, assign for instance 192.168.0.1 to the PC.
Step 2 : Connect the PC to the XSRACK
Connect the PC directly to a slot of the XSRACK with any Ethernet cable (straight or cross-wired);
Step 3 : Launch the web browser
Launch the web browser and then enter the IP address of the slot : 192.168.0.128
The Home page of the administration server is displayed.
Note :
Access to the administration server is not protected when configuring the slot for the first time.
1.3
Changing the configuration later
Thereafter, the administration server of an XSRACK slot is accessible from the Ethernet interface or remotely
through the SHDSL line at the IP address assigned to the product.
•
Open the html browser and enter the IP address of the administration server of the slot
•
Enter, if any, the username and password that protect the access to the administration server.
