Etic Telecom XLAN+ Series, Setup Manual

Page: 8 / 84

PREPARING THE SETUP
Page 8
DOC_DEV_XS_Setup guide_C
1.2 First configuration
Step 1 : Create or modify the PC TCP/IP connection
Assign to the PC an IP address different but consistent with the factory IP address of the XS.
For the first configuration, assign for instance 192.168.0.1 to the PC.
Step 2 : Connect the PC to the XS
Connect the PC directly to the XS with any Ethernet cable (straight or cross-wired);
Step 3 : Launch the web browser
Launch the web browser and then enter the IP address of the XS : 192.168.0.128
The Home page of the administration server is displayed.
Note : Access to the administration server is not protected when configuring the XS for the first time.
1.3 Changing the configuration later
Thereafter, the XS administration server is accessible from the Ethernet interface or remotely through the
SHDSL line at the IP address assigned to the product.
•
Open the html browser and enter the IP address of the administration server of the XS.
•
Enter, if any, the user name and password that protect the access to the administration server.