DIAGNOSTICS AND MAINTENANCE
DOC_DEV_XS_Setup guide_C
page 73
8
Updating the firmware
It is usually performed via the Ethernet port or remotely, via the SHDSL link.
The update does not change the setting of the XS switch.
If the update is done remotely, verify that the new firmware version is compatible with the current setting to
insure that the SHDSL link will go up automatically after the update.
The update can be done in two ways :
If the updated firmware file is accessible from the user's PC, it can be done directly with the browser using
HTTP POST.
The update can also be done via a TFTP server there the updated firmware file has to be previously loaded.
To perform the firmware update using HTTP POST,
•
In the menu, choose
Maintenance > Firmware update
.
•
Select the new firmware file.
•
Click
Update now
.
After a few seconds, the RUN LED blinks red.
Wait about 5 minutes and then check that the update is done (
About
item in the menu).
Summary of Contents for XLAN+ Series
Page 6: ......
Page 49: ...SETUP DOC_DEV_XS_Setup guide_C page 49 ...
Page 74: ......
Page 82: ......