Etic Telecom XLAN+ Series, Setup Manual

Page: 50 / 84

SETUP
Page 50
DOC_DEV_XS_Setup guide_C
14 IP Routing
14.1 Overview
The XS can perform basic IP routing functions between its local interface consisting of 2 to 4 Ethernet ports
and the SHDSL interface, consisting of 1 to 4 SHDSL ports.
See chapter « IP addresses setting »
To access devices located in a different IP network, the XS usually send the IP frames to its default gateway.
However, for more complex situation, it is possible to create static routes or use a routing protocol.
14.2 Static routes
To create a static route ,
• In the menu, choose Setup > IP protocol and routing > Static routes .
•
Click Add … .
•
Enter the destination IP address, the netmask, the gateway address used for this destination and the cost
of the route.
IP0.2
SHDSL IP network 0
IP0.1
IP network 1
IP network 2