SETUP
Page 44
DOC_DEV_Router setup guide_A
10
Publish the IP address of the router on the Internet
10.1
Overview
The DynDNS or the NoIP services make possible to connect remotely to a device over the Internet even if the
IP address of that device is dynamic.
The IP address of the device has to be a public IP address.
For instance, if a remote PC needs to connect to a RAS-EC or a IPL-C cellular router, DynDNS or NoIP
solutions will help only if the IP address assigned by the mobile data servic
e provider to the “antenna” of the
router is a public IP address.
10.2
Set-up
Step 1 : Reserve a dynDNS domain name on the dyndns.org web site.
For instance mymachine.dyndns.org.
Step 2 : Router set-up
•
Select the Set-up>Network>DynDNS menu
•
Select the Enable option
« Dynamic DNS service provider » parameter :
Select DynDNS or NoIP
«
DNS account login” parameter :
Enter the login assigned by dyndns.
«
DNS account password” parameter :
Enter the password assigned by dyndns.
« Hostname» parameter :
Enter the DynDNS domain name (for instance mymachine.dyndns.org).
Remark :
If the IP address assigned to the antenna of the router on the 3G network is public but not fixed,
it is
possible to use the DynDNS service to set a connection from a device connected to the internet towards a
device connected to the RAS-3G router.
To enable the DynDNS service proceed as follows :
•
Reserve a dynDNS domain name on the dyndns.org web site.
For instance mymachine.dyndns.org.
•
Select the« Set up
» menu, and then WAN interface, and then “dynamic IP address”
.
« Enable» checkbox :
Select that checkbox.
Summary of Contents for RAS Series
Page 1: ...DOC_DEV_Router setup guide_A RAS IPL SIG _________________ SETUP GUIDE _________________ ...
Page 8: ......
Page 14: ......
