Two-Wire Video Intercom User Manual
3
EDS201B
Chapter 3 Installation
Note
●
Make sure the device in the package is in good condition and all the assembly parts are
included.
●
Make sure your power supply matches your door station.
●
Make sure all the related equipment is power-off during the installation.
●
Check the product specification for the installation environment.
3.1 Accessory Introduction
The dimension of gang box/junction box is shown below.
Figure 3-1 Dimension of Gang Box
The dimension of the gang box is 103 mm × 162 mm × 40 mm.
3.2 Surface Mounting with Gang Box
Steps
1. Take the gang box and screws from the packing box.
2. Fix the gang box onto the wall with 4 screws.
3. Install the door station into the gang box, and fix it with 4 screws.
