4
1
Mounting to drywall
□
Drill two holes large enough to clear the closed fl aps of
the butterfl y nut on the toggle bolt (not included). Make
sure to fasten the toggle bolt into the butterfl y nut before
inserting the fl aps into the ceiling.
□
Tighten the toggle bolt.
Installation
Select a suitable location that can support the weight of the LED Grow Light. The light must be mounted a minimum of 8 inches from
adjacent lighting equipment and from materials including, but not limited to, walls, ceilings, movable partitions, and other combustible
materials.
NOTE:
When determining the desired location for suspension mounting the light fi xture, make sure the light fi xture is located directly below
the electrical outlet and that the distance between the electrical outlet and the end of the light fi xture is less than 10 ft.
NOTE:
Separate mounting hardware (not included) not shown to actual size.
2
Mounting to wood
□
Drill two 1/16 in. diameter holes in the ceiling to
accommodate hook screws (not included). Make sure to
fasten the combo wood-machine end into the metal hook.
□
Tighten the hook screw (not included) into the wood.
For mounting to drywall:
Toggle bolt x 2
Part
Description
Quantity
Toggle Bolts
Consisting of a No. 10-24 bolt 2-7/8 inches long with two
tapered wings 1 by 5/16 inch.
2
Studs
Measuring 1-3/4 inches overall and having 1-1/4 inches of
wood screw threads on one end and at least six No. 10-24
machine screw threads on the other end.
2
Metal Hooks
With a No. 10-24 threaded hole that engages the bolt threads.
2
For mounting to wood:
Hook screw x 2
NOTE:
Eye hooks can be used as an alternate method of attaching the fi xture to the ceiling.
NOTE:
If using eye hooks in the ceiling instead, attach
the chain to the eye hooks with S hooks.
NOTE:
If using eye hooks in the ceiling instead, attach
the chain to the eye hooks with S hooks.
