EtherWAN EX94000, Quick Start Manual

Page: 19 / 27

Hardened Ethernet Switch
19
Connecting to Power
Redundant DC Terminal Block Power Inputs or 12VDC DC
Jack:
Redundant DC Terminal Block Power Inputs
There are two pairs of power inputs can be used to power
up this device. You need to have two power inputs
connected to run the device, but the FAULT LED indicator
will light up to remind that the power redundant system
functions abnormal in case either PWR1 or PWR2 is dead.
This device, however, continues working normally even
fault LED indicator lights up.
Step 1: Connect the DC power cord to the plug-able terminal block on the
switch, and then plug it into a standard DC outlet.
Step 2: Disconnect the power cord if you want to shut down the switch.