ED3238 www.etherwan.com
70G-ED3238XQ1
1
This quick start guide describes how to install and use the Ethernet Extender over coaxial cable. This is the Ethernet
Extender of choice for environments constrained by space.
Installation
ED3238T (Transmitter)
: This is a PoL (Power over Link) transmitter. Data and power can be delivered at the same
time through a coaxial cable to turn on and communicate with ED3238R (Receiver) via BNC interface.
ED3238R (Receiver):
This is a PoL (Power over Link) Receiver. ED3238R (Receiver) can be powered by ED3238T
(Transmitter) through a coaxial cable. The Ethernet port of ED3238R (Receiver) supports IEEE802.3af PoE/PSE for
fulfilling PoE/PD application.
Physical Description
The Port Status LEDs and Power Inputs
ED3238T
ED3238R
LEDs State
Indication
Steady Power
received
POWER
Off Power
off
Steady
A valid Extender connection established
Flashing Data transmission or receiving
LINK/ACT
Off
Extender connection is not established
Steady
Powered device (PD) is connected
PoE
Off
Powered device (PD) is disconnected
Steady
A valid Ethernet connection established
Flashing Data transmission or receiving
Green
Off
No valid Ethernet connection established
Steady
Link speed at 100Mbps
Yellow
Off
Link speed at 10Mbps
