CLEANING:
• Always remove the plug from the electrical socket and allow the heater to cool down
before cleaning the heater.
• Wipe heater with a soft dry cloth.
• Do not try to repair the heater yourself, always consult a suitably qualified engineer.
WARNING:
Do not immerse the heater in water.
Do not use any cleaning chemicals such as detergents and abrasives.
Do not allow the interior to get wet.
EVENTUALLY, YOU MAY WANT TO REPLACE THIS HEATER:
New regulations require the recycling of Waste from Electrical and Electronic Equipment
(European “WEEE Directive” effective August 2005—UK WEEE Regulations effective 2nd
January 2007). Environment Agency Registered Producer: WEE/GA0248QZ.
When your heater comes to the end of its life or you choose to replace it, do not dispose of
it with your normal household waste. Please recycle where facilities exist. Check with your
supplier or local authority for suitable options.
IF YOU EXPERIENCE PROBLEMS:
If your heater is defective or develops a fault, please return it to the place where you bought
it. You can call our Helpline for advice. The Helpline will gladly give advice on any aspect of
any Eterna heating product.
SPECIFICATION:
VOLTAGE: 220 – 240V – 50Hz
POWER MAX: 400W
SAFETY AND INSTALLATION INSTRUCTIONS
11
042
6-B
T
HELPLINE:
• T: 01933 673 144
• F: 01933 678 083
• E: [email protected]
Visit our website:
www.eterna-lighting.co.uk
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE USING YOUR HEATER
PLEASE RETAIN FOR FUTURE REFERENCE
Model:
FPH400
400W Frost Protection
Convector Heater
Pack contents:
400W Frost protection convector heater Qty.1
c/w 3A. fused moulded 3 pin plug fitted
Fixing screws
Qty.2
Wall plugs
Qty.2