409-35011
Rev D
15
of 83
DESCRIPTION
Machine overview
Rotating stripping head
The HV-CP is fitted with three blades, three cutting wheels, and a mandrel. This offers many advantages,
such as precision centering, braid flaring, and matched toolsets for repeatable processing. The rotating
blades cut the entire circumference of the insulation with precision.
Multi-step stripping
The HV-CP processes multi-layered conductors in steps that can be programmed in any order. The cut
parameters can be independently set and optimized for eve
ry level. The stripping machine’s memory
accommodates different conductors and processing parameters.
Operation
The operation of the HV-CP is intuitive. The graphical touchscreen display assists the operator with
setting the processing parameters by creating an article: building a cable profile, setting the run
parameters, and initiating a production run.
Integrated air jets for automatic blade cleaning and an in-line vacuum to remove slugs keep the
processing area clean and efficient. A removable container is located inside the chassis for easy waste
disposal.
Specifications
Table 1: Specifications
Property
Value
Wire cross section (stripping)
10 mm
2
- 120 mm
2
Maximum outer diameter
23.0 mm [0.90 in]
Minimum diameter of inner conductors
6.0 mm [0.24 in]
Maximum outer jacket strip length
80.0 mm [3.15 in]
Maximum braid strip length
70.0mm [2.75 in]
Increments for incision diameter
0.01 mm [0.0004 in]
Increment for stripping length
0.01 mm [0.0004 in]
Article library: maximum number of articles
1500
Sequence function: max number of steps
100
Typical cycle time
30 sec
