22
Source Four LED Series 3 User Manual
Control and Customize the Display
DMX
Address
Mode
DMX Loss
1/3 Red
001
3 Ch RGB
HLL 2 Min
DMX
UI Locked
UI Lock
Lock the Display
Set this switch to lock the UI and prevent any
changes to the fixture setup. The display
indicates when the UI is locked.
Adjust the Display Settings
1. Press the Menu button (
), turn the
Intensity encoder to navigate to Local
Settings, and then press the Intensity
encoder to select it.
2. In the Local Settings screen, turn the
Intensity encoder to select the display
parameter that you want to modify,
and then press the Intensity encoder to
modify it.
3. Turn the Intensity encoder to modify the value of the parameter, and then press the
Intensity encoder to save the value.
4. Press the Menu button (
) or press the red encoder until you return to the Main Menu
screen when you are done.
Parameter
Description
Backlight
Set the brightness of the display backlight from 10–100%.
Encoders
Set the brightness of the four encoders from 10–100%.
Timeout
Set the time that the display will remain illuminated after the last time you press an
encoder or button. Options are:
•
Never (display is always illuminated)
•
30 seconds
•
1 minute (default)
•
5 minutes
•
15 minutes