Use Fixture in DMX Mode
15
Parameter
DMX Value
Description
Comments
Tuning
(Color
calculation
method)
0–49
Brightest
Calculation uses a combination of LEDs to produce the
brightest version of the selected chromaticity.
50–149
Spectral
Calculation uses a combination of LEDs to produce the
best spectral match of the selected chromaticity. The
Spectral option results in higher color rendering, but
lower intensity levels.
150–170
Expanded mode: Reserved
This range is reserved for future development, but
currently outputs the Brightest color calculation
method.
Studio mode: Metamer
(linear adjustment from
-1 to 1)
Manually tune the metamer using the Spectral
calculation method.
171–255
Reserved
This range is reserved for future development, but
currently outputs the Brightest color calculation
method.
Set DMX Loss Behavior
In the DMX screen, turn the red encoder to set the DMX loss behavior. Options are:
•
Instant:The fixture immediately goes dark.
•
HLL 2min: Hold last look for two minutes or until you make local changes. If you make no
changes during the two minutes, the fixture fades out over two seconds.
•
HLL: Hold last look until you make local changes. This is the default setting.
•
Preset 12: Two-second fade from last look to Preset 12.