28
SolaPix 7 User Manual
Maintenance
CAUTION:
RISK OF ELECTRIC SHOCK! Disconnect power before servicing.
ATTENTION :
RISQUE DE CHOC ÉLECTRIQUE! Couper l'alimentation avant
l'entretien.
Keep the following in mind during regular service and inspection:
•
All screws for installing the fixture or parts of the fixture must be tightly connected and
must not be corroded.
•
There must not be any deformations to the housing, lenses, rigging, and installation points
(ceiling, suspension, trussing).
•
Moving parts must not show any signs of wear and must move smoothly without issue.
•
The power supply cables must not show any damage, material fatigue, or sediment.
•
If spare parts are required, order only genuine parts from your local authorized dealer.
To ensure that the fixture remains in good working condition and does not fail prematurely,
regular maintenance is recommended.
Clean the Fixture
CAUTION:
The backside of each lens in the SolaPix 7 fixture is coated with a
HazeFree lens coating technology (patent pending) that keeps the lens clear
when the fixture is used with theatrical haze. Use of paper toweling or other
abrasive, high-friction wipes and ammonia-based glass cleaners may
permanently damage the coating.
If the lens coating wears away, contact ETC Technical Services for assistance.
1. Clean the lens only when necessary, and only use a Silky Microfiber Optical Cloth with
purified water or an ammonia-free glass cleaner such as Miller Stevenson MS-260 Glass
Cleaner.
2. Clean the fans regularly to ensure maximum airflow and efficient cooling. This will ensure
that the light source operates in the best possible condition.
Replace the Fuse
The fuse in this fixture is not user-replaceable. Contact ETC Technical Services for assistance.
See
Help from Technical Services on page 2
for contact information.
