ETC Eos Remote Processor Unit 3, Setup Manual

Page: 1 / 3

ETC Setup Guide
Eos
®
Remote Processor Unit 3 (RPU 3)
RPU 3 Page 1 of 3 Electronic Theatre Controls, Inc.
Corporate Headquarters

Middleton, WI, USA

Tel +608 831 4116

Service: (Americas) service@etcconnect.com
London, UK

Tel +44 (0)20 8896 1000

Service: (UK) service@etceurope.com
Rome, IT

Tel +39 (06) 32 111 683

Service: (UK) service@etceurope.com
Holzkirchen, DE

Tel +49 (80 24) 47 00-0

Service: (DE) techserv-hoki@etcconnect.com
Hong Kong

Tel +852 2799 1220

Service: (Asia) service@etcasia.com
Web: www.etcconnect.com

© 2015 ETC. All Rights Reserved.

Product information and specifications subject to change.
4350M2200

Rev B

Released 2015-02

ETC intends this document to be provided in its entirety.
This guide outlines the setup and configuration of your Eos Remote Processor Unit 3 (RPU 3). For
information on using the Eos software installed on your RPU, please refer to the Eos Ti, Eos, and
Gio Operations Manual that shipped with your console or you may download it from our website
at
www.etcconnect.com .
The Eos RPU 3 can be used as a primary, backup, or client processor with any Eos Family desk,
other than Element. It can also be used for independent playback applications. Eos RPU 3 ships
with the following:
• Remote Processor Unit
• USB Keyboard
• USB Mouse
• Rack Mount Hardware Kit
• IEC Power cord
• Three Active Display Port to DVI-D Adapters
• Label Set
• Setup Guide and Current Release Note Documentation
Hardware Setup
Rear Panel
Step 1: Attach the IEC power cord to the power connector.
Hard Power Switch
IEC Power
Connector
Display Ports
USB 2.0 ports
Ethernet
Ports 1 & 2
Audio Ports
(Not Currently
Enabled)
DMX x2
Phone
Remote
Remote
Trigger
Midi In
& Out