ETC Emphasis Lighting Control System, User Manual

Page: 83 / 292

4
Live Editing 73
Select dimmers:
• Press <Dim> [ x ] to select a single dimmer for dimmer check, or in Patch or Park
displays.
• Press <Dim> [ x ] [And] [ z ] to select non-consecutive dimmers in Patch or Park.
• Press <Dim> [ x ] [Thru] [ z ] to select a range of dimmers in Patch or Park displays.
• Press <Dim> [ a ] [Thru] [ g ] [Except] [ c ] to select a range of dimmers, except dimmer
[ c ] in channel patch or park.
• You can use [Except] multiple times to remove multiple dimmers from the selection:
<Dim> [1] [Thru] [1][0] [Except] [5] [Except] [7] , selects dimmers 1-4, 6 and 8-10 in
Patch or Park displays.
Select fixtures:
• Press [S8 - Fixture] [ x ] to select a fixture number. Use [And] , [Thru] and [Except] to
select multiple fixtures.
• In Emphasis Visualization, you can click on a fixture symbol to select its channels. See
the
Emphasis Visualization User Manual for more information on selecting fixtures
using the mouse.
Concepts
In Emphasis Visualization, you can create groups of fixtures (conventional or moving light
fixtures). These are called concepts and are found in the Shortcut bar. Use concepts to
select groups of channels and fixtures, then set levels either with the mouse or with the
Emphasis Console features described in the next section. See the Emphasis Visualization
User Manual for more information on creating concepts and setting levels within
Visualization.