ETC Emphasis Lighting Control System, User Manual

Page: 229 / 292

B
Maintenance and Troubleshooting 219
Open the Facepanel
If you have an Expression or Insight facepanel, you may find it necessary to open the
facepanel. For Expression 3, Insight 3 and Expression/Insight ECS facepanels, a spare
parts kit is stored inside and can be retrieved by opening the facepanel.
C A U T I O N :
Do not open Express facepanels. If you have problems with an Express facepanel
beyond changing the External 12V fuse, please contact your dealer or ETC
Technical Service for help.
Open the Expression/Insight face panel:
Step 1: Turn off the Facepanel and disconnect the AC input cable.
Step 2: Loosen the knobs at the lower left and right corners of the top panel.
Step 3: Raise the top panel and hold or prop it in upright position. Be aware that
Expression 2x and Insight 2x facepanels may not have the integral locking
mechanism to hold the top panel open.
Spare parts kit
The spare parts kit inside Expression ECS and Insight ECS facepanels contains the
following:
• Expression/Insight ECS Facepanel Software disk
• Expression/Insight v3.1 Console Software disk
• Remote Units v3.1 Software disk
• Key for A/B switch
• Two 6.3A fuses (AC Input)
• One 2.5A fuse (RFU)