ETC Emphasis Lighting Control System, User Manual

Page: 123 / 292

5
Blind Editing 113
Spreadsheet
In the Cue Spreadsheet, you can see channel levels for recorded cues in a spreadsheet
layout. You can edit or delete cues one at a time, or by selecting ranges. You can also use
[Track] to edit cues and you can create new cues within the spreadsheet. Using the replace
level feature, you can change channels at one level to a new level, without having to select
them individually.
Set the track status in the spreadsheet display:
Step 1: Press [Blind] . The Blind display defaults to cues.
Step 2: Press [S3 - Spread Sheet] to display the cue spreadsheet.
Step 3: Press [S7 - Enable Track] to change the track status. [S7] will always indicate
the next available setting: Enable Track, Enable Backtrack, Enable Filltrack or
Disable Track. You can also use the [Track] key, instead of [S7] , if you wish. The
current track status is displayed below the keypad corner.
C A U T I O N :
Unlike the Stage and Blind displays, changes made in the spreadsheet are
recorded immediately without the need for the additional [Record] or [Track]
command. Levels will track or not track based on the track status, indicated below
the keypad corner. Changes made in the spreadsheet will be stored, but will not
update levels on stage until you play back the cue again.