ETC Element Classic, User Manual

Page: 371 / 687

Cue Playback 357
cue list. If changes are made to a fader set to default mapping in the fader configuration
display, those changes will also happen in the Cue List Index. If set to Local, any changes made
in the fader configuration display will impact only that instance of the content.
To load a new cue into the pending file of a playback fader, when auto playback is disabled in
setup, or when you want to move a cue list to a different fader, first place that cue or list
number on the command line then press the associated [Load] button for the destination
playback fader.
•
[Cue] [4] [Load] - changes the selected cue and loads it to the associated fader. This
action assumes cue 4 is from the same cue list as is currently selected.
•
[Cue] [3] [/] [Load] - changes the selected cue list and loads it to the associated fader.
•
[Cue] [5] [/] [6] [Load] - changes the selected cue list and loads it to the associated fader
with cue 6 as the pending cue.
Changing Fader Pages
Navigation changes to fader banks and wings in the same paging group will advance all the
fader pages in the group. See
Wing Paging Groups (on page 214) .
When fader pages are changed, motorized faders assume the last position the faders were in
on that page. This includes homing submasters to their required home position if needed.
Paging Forwards
Pressing [Fader Page], or [+] on an external wing, will advance through the available pages of
faders.
If pressed on a fader page with content, the pages will advance through subsequent pages
with content until a blank page is reached. After that blank page, the remaining blank pages
will be skipped, and the next page with content will be displayed. Pages will loop infinitely.
Example:
Pages 1, 2, and 5 are populated on a 1x10 fader wing. From page
1, pages will be advanced in the order 1, 2, 3, 5, 6, back to 1, and so on.
Paging Backwards
Pressing [Shift] & [Fader Page], or [-] on an external wing, will decrement through fader pages
using the same logic as above. The first blank page chronologically after a page with content
will still be used in reverse order. Pages will loop infinitely.
Example:
Pages 1, 5, 6, and 8 are populated on a 1x10 fader wing. From
page 1 , pages will decrement in the order 1, 9, 8, 7, 6, 5, 2, back to 1, and so
on.
Accessing Specific Pages
You can access a specific fader page at any time, by holding [Fader Page] and pressing the
number of the page you wish to access.
Specific pages can also be accessed by holding [Fader Page] and using the bump buttons on
an external wing.