ETC Element Classic, User Manual

Page: 109 / 687

System Basics 95
A pop-up magic sheet can be assigned in Setup>User>Displays>Popup Magic Sheet. If a
magic sheet has not been assigned in Setup, when you first click the pop-up magic sheet icon,
you will be able to select a default magic sheet from a list of the available ones.
In Setup>User>Displays>Popup Nav Lock, you can enable or disable the zoom and scroll
navigation for pop-up magic sheets. This option is enabled by default.
See About Magic Sheets (on page 446) for more information
Pop-up ML Controls
This option allows you quick access to the ML controls display in a small pop-up window over
your current display. See
Moving Light Controls (on page 124) for more information about this
display.
Press the automated fixture beams icon to close the display when opened.
Pop-up Snapshots
This option displays your favorite snapshots in a small pop-up window for quick access. Select
a snapshot to recall it. Favorite is an option that can be selected or deselected when recording
a snapshot.
Press the camera icon to close the display when opened.
See About Snapshots (on page 432) for more information.
[Time] Key
Holding [About] and pressing [Time] allows you to view discrete timing data behind any
channel parameter. [Time] exposes channel or parameter specific timing for any channels in
the current cue. The first value is the delay time. If “--” is displayed, there is no delay. The
value to the right of the / is the transition time.
You can lock this mode by holding [About] and double tapping [Time]. When in display time
mode, “Display Timing” will display in the upper left of the live display. To exit this mode,
press [About] again.
[Data] Key
Pressing and holding [Data] allows you to view the values behind any referenced or marked
data. [Data] exposes the next lower reference level. So if you view a palette reference and
press [Data], the absolute data will be displayed instead. If you are viewing a preset, absolute
or palette data will be displayed, depending on what is contained in the preset.
You can lock this mode by pressing [Data] twice. When in display reference values mode,
“Data Latched” will display in the upper left of the live display. To exit this mode, press [Data]
again
View Reference Labels
Pressing and holding [About] & [Label] toggles the view to show reference labels or numbers
depending on what display setting is being used. See
Show Ref Labels (on page 214)
Live and Blind Displays
The Live/ Blind display is open as tab 1. This display cannot be closed. Multiple instances of
Live/ Blind can be opened.